background image

• 

when you feel that the power of 

  the tool becomes weaker,stop 
  using the tool and recharge the 
  battery packs, If you continue to 
  use the tool and exhaust the eletric 
  current,the battery pack may 
  become damaged.     

• 

Avoid recharging at high tempera 

   tures, A rechargeable battery pack 
   will be hot immediately after use. If 
   such a battery pack is recharged 
   immediately after use,its internal 
   chemical substance will deteriorate,
   and the battery life will be 
   shortented. leave the battery pack 
   and recha-rge it after it has cooled 
   for a while.    

• 

The battery pack should 

  only be used and/or 
  charged when battery 
  pack temperature is 
  between 5

and 30

        

• 

The battery pack needs to be 

   warmed-up or cooled down in 
   order to prevent damage to the 
   batteries internal components.   

Note: 

Failure to warm up or cool 

          down a battery pack could 
          result in serious damage to the 
          battery, charger and user.

SERVICE

        

AWARNING:

 Preventive 

maintenance performed by 
unauthorized personnel may result in 
misplacing of internal wires and 
components which could cause serious 
hazard. We recommend that all tool 
service be performed by RIDA 
Customer Service.

MAINTENANCE

        

AWARNING:

 To avoid serious 

personal injury, always remove the 
battery pack from the tool when 
cleaning or performing any 
maintenance.

GENERAL MAINTENANCE 

        

AWARNING: When servicing, use 

only identical replacement parts. Use 

of any other parts could create a 

hazard or cause product damage. 

Periodically inspect the entire product 
for damaged, missing, or loose parts 
such as screws, nuts, bolts, caps, etc. 
Securely tighten all fasteners and caps 
and do not operate this product until 
all missing or damaged parts are 
replaced. Please contact RIDA 
Customer Service for assistance. 

TROUBLESHOOTING

What to do when something doesn’t 

work…

Malfunctions are often caused by 
minor faults. You can easily remedy 
most of these yourself. Please consult 
the following table before contacting 
the vendor. You will save yourself a 
lot of trouble and possibly money too.
If you can’t fix the fault yourself, 
contact [email protected] 
Please be aware that any improper 
repairs will also invalidate the 
warranty and additional costs may be 
incurred.        

DANGER! Exercise 

caution – risk of injury!

Unprofessional repairs may 
mean that your unit will no 
longer operate safely. 
This endangers you and your 
environment.  

www.ridatool.com

www.ridatool.com

20

21

RCW787-1A

RCW787-1A

Error/Fault

Cause

Device does not work.

Is the device defective?

Battery pack discharged?

Battery pack defective?

Tool holder does not turn. 
Is the rotation direction switch set 

to the centre setting?

DISPOSAL

Disposal of the appliance

A crossed-out wheelie bin icon 
means: Batteries and 
rechargeable batteries, electrical 
or electronic devices must not be 
disposed of with household waste. 
They may contain substances that are 
harmful to the environment and 
human health.   

Consumers must dispose of waste 
electrical devices,spent portable 
batteries and rechargeable batteries 
separately from household waste at 
an official collection point to ensure 
that these items are processed 
correctly.

Batteries and rechargeable 
batteries, which are not 
permanently installed in waste 
electrical devices, must be 
removed prior to disposal and must 
be disposed of separately.Lithium 
batteries and battery packs in all 
systems must only be retuned to a 
collection point when dis-charged. 
Batteries must always be protected 
against short circuits by covering the 
poles with adhesive tape.

Remedy

Contact [email protected]

 Charging the battery pack – p.16.

 Changing the rotation direction 
 – p.16.

Содержание RCW787-1A














Отзывы: