32DPF702.A
2 - 5
c. Refer
to
Figure 2-7
. Strip .350 - .370” (8.90 - 9.40mm) of insulation from end of the two 8 AWG (6 mm
2
)
wires. Use a crimping tool to crimp terminal onto both 8 AWG (6 mm
2
) wires.
FIGURE 2-7: CRIMPING 8 AWG WIRES
d. Refer
to
Figure 2-8
. Strip 1/4” (6.35 mm) of insulation from end of each 14 AWG (1.5 mm
2
) wire. Use a
crimping tool, to crimp terminal onto all six 14 AWG (1.5 mm
2
) wires.
FIGURE 2-8: CRIMPING 14 AWG WIRES
e. Refer
to
Figures 2-9
and
2-10
. Insert 8 AWG (6 mm
2
) wires into Molex connector and connect to motor
cable.
FIGURE 2-9: WIRE TO MOLEX CONNECTOR
FIGURE 2-10: MOTOR CONNECTION
