1 - 5
INTRODUCTION
FEBRUARY 2012
32DF1002.B.1
F10X-SERIES SERVICE MANUAL
TABLE 1-1: F10X-SERIES MAJOR LIFT COMPONENTS
REF
NAME
DESCRIPTION
Left, Right, Front, Rear
Reference points from outside of vehicle looking inward at lift.
1
Pump Enclosure
Contains lift electrical and hydraulic control components.
2
Electric Circuit
Breakers
Prevents high-current damage to lift electrical components.
3
Hydraulic Pump
Assy.
Electro-hydraulic unit provides hydraulic pressure used to raise platform.
4
Pump Handle
Used to manually operate hydraulic pump.
5
Control Pendant
Hand-held device used to control lift operation.
6
Carriage
Part of traveling frame that is mounted on rollers; moves on rails located inside enclo-
sure. Supports lifting frame.
7
Deployment
System
Part of carriage. Employs an electric gear-motor to propel platform out of enclosure, or
pull it back in.
8
Carriage Release
Lever
Used when electric power is not available to lift. Disengages platform from enclosure to
facilitate manual deployment. Actuated by squeezing trigger.
9
Slam-Lock
Handle
Locks handrail in upright position. L-handle unlocks handrail from upright position before
lowering.
10
Lifting Frame
Hinged arms that lift or lower platform; driven by twin hydraulic cylinders attached to car-
riage.
11
Manual Rollstop
Override Knob
Provides manual control of rollstop if electrical power is lost.
12
Platform Rollstop
Front barrier prevents wheelchair from inadvertently rolling off the platform during lift use.
13
Platform
Curbed area occupied by passenger during lift operations.
14
Occupant
Restraint Belt
Occupant Restraint Belt helps prevent unintentional acceleration of wheelchair from plat-
form. Electrically interlocked so that “UP” and “DOWN” functions are disabled if the belt
is unbuckled.
15
Standee
Handrails
Provides platform occupant with a stable handhold.
16
Bridgeplate
Plate unfolds when platform is at floor height to bridge gap between platform and vehicle
interior.
17
Enclosure
Platform housing is rigidly attached to vehicle chassis.
18
Controller
Translates pendant command signals to control lift electrical and hydraulic components.
Monitors lift functions.
19
Carriage Drive
Chain Lock Assy.
Fastened to enclosure. Operated by carriage release lever. Normally holds carriage
drive chain stationary. Can be disengaged to ease manual movement of platform.
20
Stow Lock
Assembly
Secures travelling frame and carriage within the enclosure. Releasing the stow lock will
allow the travelling frame to deploy.
END OF TABLE
