35
Soleil-PJ1Training
Slide 35
Entering Service Mode
Hold down “Enter" and
"Menu" simultaneously for 2
seconds.
Then press the left button,
then the down button, then
the up button.
Then press and hold the
[Enter] button on the
projector for longer than 2
seconds.
When the projector enters
the Service Mode, the buzzer
beeps for 3 seconds.
If it doesn’t beep, repeat
from the beginning.
The projector remains in this
mode until you disconnect
the power cord.
Service Mode features
Service status display
Keystone calibration
Sub contrast adjustment
Color wheel index delay adjustment
Fan control
Test pattern projection
