T
echnical
B
ulletin
PAGE: 2/8
Model:
Loire
Date:
27-Sep-16
No.:
RD776006
SOLUTION
Note:
This solution is only affective for paper conforming to the conditions mentioned
above.
PROCEDURE
Part number
Description
Q’ty
The firmware
v01.070:06 or later
1
D7767004
(Feeler extension part )
FILM:SURFACE OF PAPER
SENSOR
1
D4473413
(Rubber part)
CUSHION:STOPPER
2
D7767003
(Sponge part)
CUSHION:STOPPER:3MM
2
-
Alcohol
Apprx. amount
-
Cleaning cloth
Step 1.
Check the version of firmware installed in the High Capacity Stacker SK5030.
If
v01.070:06
or later is already installed, go to step 2.
If not, install the latest version and go to step 2
Step 2.
Install the feeler extension part (FILM:SURFACE OF PAPER SENSOR ; P/N D7767004).
The paper height is lowered 3mm from the normal position, and
the vibration of the paddle against the stacked papers will be
reduced.
How to attach the feeler extension part
1) Remove the end fence assembly from the stacker.
(Refer to Shift Tray Exit Sensor, Paper Height Sensor in
Replacement and adjustment on the service manual of Stacker)
