Ricoh SP 277SFNwX, Руководство по установке

Страница: 10 / 15

8
16. Check the result.
Connection has succeeded:
DSG355
Connect succeed!
Connection has failed:
DSG356
Connect failed!
• Check the configuration for the router (access point), and then
try the connection again.
17. Configuring the Wi-Fi settings is complete.
Easy Setup Using the WPS Button
● Before doing the following procedure, install the printer
driver according to the procedure on page 5
"Connecting the Machine (USB/Network)".
● Make sure the Ethernet cable is not connected to the
machine.
● In Steps 16 to 17, configure each setting within two
minutes.
The following item is necessary to set up a wireless
connection.
● Router (access point)
1. Check that the router (access point) is working correctly.
2. Press the [User Tools] key.
DSH080
3. Press the [ ] or [ ] key to select [Network Settings], and
then press the [OK] key.
User Tools
8 9
Network Settings
Tray Paper Settings
Print List/Report
DSH078
4. If you are requested to enter a password, enter the password
using the number keys, and then press the [OK] key.
A password for accessing the [Network Settings] menu can be
specified in [Admin. Tools Lock] under [Admin. Tools] menu.
5. Press the [ ] or [ ] key to select [Wi-Fi], and then press the
[OK] key.
Network Settings
2 4
Wi-Fi
Ethernet
IPv4 Configuration
DSG084
6. Select [Wi-Fi Enable], and then press the [OK] key.
Wi-Fi
Wi-Fi Enable
DSG085
7. Press the [ ] or [ ] key to select [Enable], and then press
the [OK] key.
Wi-Fi Enable
Enable
Disable
DSG086
8. Press the [User Tools] key to return to the Initial screen.
9. Wait until the machine restarts.
10. Press the [User Tools] key.
DSH080
11. Press the [ ] or [ ] key to select [Network Settings], and
then press the [OK] key.
User Tools 10 11
Network Settings
Wi-Fi Setup Wizard
Print List/Report
DSG087
12. If you are requested to enter a password, enter the password
using the number keys, and then press the [OK] key.
A password for accessing the [Network Settings] menu can be
specified in [Admin. Tools Lock] under [Admin. Tools] menu.
13. Press the [ ] or [ ] key to select [Wi-Fi], and then press the
[OK] key.
Network Settings
2 4
Wi-Fi
Ethernet
IPv4 Configuration
DSG084
14. Press the [ ] or [ ] key to select [WPS], and then press the
[OK] key.
Wi-Fi
6 7
Input SSID
Current Connection
WPS
DSH049
15. Press the [ ] or [ ] key to select [PBC], and then press the
[OK] key.
WPS Type 1 2
PIN
PBC
DSG092
16. Press [Yes].
WPS PBC Connect ?
PBC
Yes No
DSG093
“Please push the [AP] within 2 minutes” appears, and the machine
starts to connect in PBC method.