Close camera back and snap it shut.
Advance Film-Advance Lever (C)
two or three times depressing
Shutter Release Button (D) each
time until Exposure Counter (F) is
set to "1", ready for your first
picture . Set the camera for the film
which you are using. To set film
speed pull up Shutter Speed Dial
(B) and rotate it until the ASA
number of your film is opposite the
red marker
Check the instruction sheet packaged with your film for the correct ASA speed for that film. If you are using
German film, refer to Fig. 7 for the relation between ASA and DIN.
When you check the camera before loading the film, do not turn the sprocket or Film Take-up Spool (W) after
advancing Film-Advance Lever (C). Besides, do not turn the sprocket at 350 . degrees before advancing Film-
Advance Lever (C).
BATTERY LOADING
Unscrew Battery Compartment Cover (U) with a coin and remove it. Wipe off the surface of the mercury
battery (packaged with your camera) with cloth and place the mercury battery
in the compartment with plus "+" end up
