Combining the Continuous Shooting Mode and the Self-timer:
1. Set your camera to the Continuous Shooting Mode.
2. Press the Self-timer Button. Your camera will wait 10 se coeds, then shoot
two sequential frames.
3. Push the Mode Button to cancel the Continuous Shooting Mode. Confirm
that the Hi mark disappears on the LCD Panel.
Combining the Continuous Shooting Mode and the Flash:
1. Set your camera to the Continuous Shooting Mode.
2. Press the Shutter Release Button halfway down.
3. If the amount of light is insufficient, the Flash Unit will pop up automatically
4. After the Flash Ready Lamp lights, press the Shutter Release Button to make
the exposure.
5. Continue shooting by holding down the Shutter Release Button. Your camera
will automatically make another exposure each time the Flash Ready Lamp
relights.
6. Press the Mode Button to cancel the Continuous Shooting Mode, and push
the Flash Unit down to the original position.
Combining the Continuous Shooting Mode with the Self-timer and Flash:
1. Set the camera to the Continuous Shooting Mode.
2. Press the Self-timer Button. If the amount of light is insufficient, the flash will pop up automatically.
3. When the flash is fully charged, again press the Self-timer Button. The Self-timer LED will light.
4www.butkus.org
4. The Self-timer LED will remain lit for 8 seconds and then start to f lash for 2 seconds. After a total of 10
seconds have elapsed, the shutter will release.
5. As soon as the Flash Ready Lamp comes on again, the shutter release a second time.
6. Cancel the Continuous Shooting Mode and push the Flash Unit down to the original position.
