T
echnical
B
ulletin
PAGE: 6/12
Reissued: 01-April-15
Model:
RICOH Scan CX v1
Date:
30-Oct-13
No.:
RD769001c
Installation and Initial Configuration
RICOH Scan CX Embedded v1 Installation & Activation
Use Remote Install Manager to install & activate RICOH Scan CX Embedded V1. Please
see the Service Manual of Remote Install Manager.
Important:
The product key used on “3. Installation/ Activation
→
4. [Install Software] Enter product
key”, in the Remote Install Manager service manual is as follows:
In case of
RE, please use the following product key
“
LMR87-RKGDB-5HXU3-EJN8M-
S49WN
”.
Note:
-
When installing "Ricoh Scan CX Embedded", the product key used needs to be a
shared key. However, because a product key has a limit to how many licenses it can
provide, there is a limit to the number of devices the same product key can be used
for. Before a product key reaches it's license limit, we will release a new product key
via this service manual.
-
Before installation, please make sure all firmwares (GW firmware) are the latest
version. Regarding the firmware update procedures, please refer to the dev ice service
manual.
