0
Precautions for Use
• The warranty supplied with this product is only valid within the country of purchase.
• Should the product fail or malfunction while out of the country, the manufacturer
assumes no responsibility for servicing the product locally or bearing any
expenditure incurred thereby.
• Do not drop the equipment or subject it to physical shocks.
• When carrying the equipment, be careful that it does not strike other objects.
Particular care is required to protect the lens.
• Abrupt changes in temperature may cause condensation, resulting in visible
condensation inside the lens or malfunction of the equipment. This can be avoided
by placing the equipment in a plastic bag to slow the temperature change, and
removing it only after the air in the bag has reached the same temperature its
surroundings.
• Keep the equipment dry and avoid handling it with wet hands. Failure to observe
these precautions could result in malfunction of the equipment or electric shock.
• Keep the connector clean.
Tip: Avoiding Condensation --------------------------------------------------------
Condensation is particularly likely to occur if you move to an area with a
sharply different temperature, if humidity is high, in a cold room after the
heater has come on, or where the camera is exposed to cold air from an air
conditioner or other device.
