Recommended. Replacement 3 V Lithium Batteries Include:
Lithium battery (3V)
Panasonic CR-1 23A
Duracell XL DL-123A
POWER SWITCH & CHECKING THE BATTERY POWER SWITCH
Each time you slide the Power Switch in the direction of the arrow, it switches from OFF, ON, and vice versa.
(Fig. 6)
The lens moves from the Storage Position to the Wide Angle Position, and the camera sets everything
automatically.
CHECKING THE BATTERY
* If the battery voltage is insufficient, the shutter may not release or the film may not advance completely. In the
following cases, replace the battery: 1 ) Turning on the Main Switch, zoom lens doesn't move to the "Wide"
position.
2) While pressing the Flash OFF Button, press the Shutter Release Button halfway.
If the AF/Flash Monitor next to the viewfinder blinks, it is necessary to replace the banery.
LOADING THE FILM
Always avoid direct sunlight when loading the film.
1. Push the Back Cover Latch Downward to open. (Fig. 7)
4www.butkus.org
2. Load the film cassette into the Film Chamber and pull out enough film leader to extend past the mark of the film
tip index. (Fig. 8, 9)
