Ricoh Ri 2000, Быстрое руководство по установке

Страница: 29 / 72

27
Once the initial ink charge is completed, the printer shows "Ready" in the upper left-hand corner
of the touch screen.
After completing the initial ink charging, proceed to the next step.
Attaching the Platen
1. Attach the platen.
The two protrusions on the back of the platen should be set correctly into the holes in the platen
base.
There is a hole on the back side of the platen base that has a guide shape.
When setting the platen, it is easier to insert the pin to the back side when viewed from the front
of the machine.