2
Associating the Delegation Server
with
Ethernet 241
To use Ethernet 241, first specify the release code for the card reader using the Management
Console. Then, via the RF IDeas Ethernet 241 Web Interface, configure the Delegation Server
with which Ethernet 241 communicates.
1.
In the Management Console, click the following items in the navigation tree to open the
[Delegation Server Settings] tab.
[System] > [Server Settings] > [Delegation Server Settings]
2.
Click the [Security] tab.
3.
In [Ethernet Card Reader Release Code], enter the release code for the Ethernet card reader.
4.
Open the RF IDeas Ethernet 241 Web Interface.
5.
On the [Ports] tab, set "SSL" to "Enabled" if using SSL for communication.
6.
On the [Server] tab, configure the "Init Server IP" or "Init Server Url" to point to the
Delegation Server.
7.
On the [Server] tab, configure the "Data Server IP" or "Data Server Url" to point to the
Delegation Server.
8.
On the [Server] tab, configure the "Init Server Str" with the following:
"/rest/cardservices/initReleasePrint?ipAddress241=$5"
9.
On the [Server] tab, configure the "Data Server Str" with the following:
"/rest/cardservices/authUserCredsAndReleasePrint?cardId=$1&ipAddress241=$5&printe
rMacAddress=$6&printerIpAddress=$7&firmawareVersion241=$9&numberOfBitsInCar
d=$a&cardIdHexadecimal=$b&secKey=xxxxxx".
Replace xxxxxx with the release code configured in Step 3.
To locate Ethernet 241 on the network, you will need Ethernet 241 Discovery Tool which
is available at the following URL:
https://www.rfideas.com/support/downloads
For details about configuration using the Management Console, see "10. List of Setting
Items", Administrator’s Guide.
For details about configuration using the RF IDeas Ethernet 241 Web Interface, see the
manual provided with Ethernet 241.
