Ricoh RDC-i500, Руководство по эксплуатации

Страница: 109 / 182

107
5
Using JOB Navi. Func. Image Capture Guide List
I
Press the shutter release button to
record the image.
After recording the image, the screen will
return to the image select screen. The
number of recordings will be displayed on the
right of the image title for images where
recording is finished. (Several recordings can
be made of one image title.)
J
Repeat steps
H
and
I
until all the images have been recorded.
K
When all the images have been recorded, press the CANCEL
button.
Note
• If the Keep Settings mode for [GUIDE LIST] is set to [ON], even if the
mode dial is set to another setting during recording (steps
H
or
I
) or
the power is turned off, you can perform operation from the previous
image select screen by switching to still image mode. However, you
cannot do this if you change the storage memory.
Pasting the Recorded Images to the Table
This function enables you to paste images recorded with the camera to a
Microsoft Excel document.
A
Insert the card with which you have finished recording into the
camera.
B
Start Microsoft Excel and open [Sample1.xlt].
C
Click on [Enable Macros].
D
Click on the [Paste All Images] button.
The dialog box for selecting the Guide List title will be displayed.
E
Click on [+] on the left of the card drive.
The list of folders will be displayed.
F
Click on [+] on the left of the [Dcim] folder.