Ricoh Pro 8300S, Руководство по устранению неисправностей, Страница: 714 / 963

3.Paper Delivery Problems
706
Paper Skew
Take the appropriate action according to the cause of the problem.
The side fences in the paper tray are too far apart.

If the side fences are too far apart, the paper may be skewed. Adjust the side fences to match the
paper width.

When you close the paper tray, the side fences may become misaligned due to the weight of the
paper. Close the paper tray slowly.
There is a scrap of paper or some other small fragment jammed in the paper feed path.
Remove the foreign object. ( Cleaning the Paper Feed Path )
The paper buckle amount is not specified correctly.
Adjust the degree of paper arching at the registration gate.
If using paper of Paper Weights 1 to 4
1. On the Adjustment Settings for Skilled Operators menu, select Machine: Image Position, and
change the value in Adjust Registration Paper Buckle. (SP1-004-1 to 3: Reg. Buckle Adjust: Tray 1
to 3).
If using paper of Paper Weights 5 to 7
1. On the Adjustment Settings for Skilled Operators menu, select Machine: Image Position > Adjust
Registration Paper Buckle (Thick Paper). Change the value. (SP1-005-001 to 3: Reg. Buckle Adj.:
Thick 5 to Thick 7).
2. Increase (+) or decrease (-) the value for the paper tray in use, and then print the image.

If the problem persists even though the setting has reached its maximum value, try decreasing
the setting.

If the problem persists even though you have tried the complete range of settings from
minimum to maximum, perform the procedure in Leading Edge Shift Unit Manual Adjustment .
Leading Edge Shift Unit Manual Adjustment
1.
Execute SP2109-003 Pattern #14, and then print a Trimming Area pattern on both sides of an A3
size sheet of paper.
2.
Pull out the drawer.