Ricoh Pro 8300 Series, Тренинг CIP

Страница: 11 / 52

CIP Training
Pro 83 00 se ries
Adjustment Settings for Operators
CIP Training
C7200 series
Adjustment Settings for Operators
Machine: Image Quality
020 2 Execute Image Quality Adjustment
Execute image density control manually.
The machine adjusts the image density. This operation takes about 30 seconds during which
a message appears on the control panel. Do not pull out the drawer while the message is
being displayed.
If the density does not change after applying this function several times, contact your service
representative.
Setting Items Values
Adjust Image Density Press [OK] to apply the setting.
•
The machine executes automatic image density adjustment after a set interval or after
printing a specified number of sheets. However, you can also manually initiate automatic
image density adjustment whenever you want.
0208 Avoid Paper Transfer Shock Jitter: Feed Interval
Specify whether or not to enable the mode to reduce the jitter*1 produced when paper
enters the paper transfer roller.
If "1" is selected, the machine adjusts the interval between sheets to reduce jitter.
However, the throughput may be reduced when you use paper larger than A4 or 81/2 × 14.
If this happens, turn this setting off to improve the throughput.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
Setting 0 1 0 1 –
•
Jitter does not occur with A4 or r smaller paper.
•
This setting is not effective for paper fed from paper trays with custom paper presets. For
such paper, the value specified in [Avoid Paper Transfer Shock Jitter: Feed Interval] in
"Advanced Settings" takes precedence.
*1 The jitter occurs when the leading or trailing edge of paper that passes through the
paper transfer unit is transmitted to the drum unit via the intermediate transfer belt,
causing banding.