Ricoh PRIPORT JP1210 Скачать руководство пользователя страница 95

Страница: 95 / 144

When the Add Ink Indicator (

) Lights

When the Add Ink Indicator (

) Lights

The

Add Ink

indicator (

) lights when it is time to supply ink.

CAUTION:

Open the front door.

Pull out the ink holder and remove the used ink cartridge.

•

If ink comes into contact with your eyes, rinse immediately in running water.
In the case of any abnormal symptoms, consult a doctor.

•

Keep the ink or ink container out of the reach of children.

•

If ink is ingested, force vomiting by drinking a strong saline solution and con-
sult a doctor immediately.

•

Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you only use the expendable supplies availa-
ble at an authorized dealer.

TSLH01IE

TSLH01JE

SilverV-gb.book Page 75 Monday, May 15, 2000 3:32 PM

Содержание PRIPORT JP1210

















































































































































Результаты поиска

Содержание PRIPORT JP1210

Отзывы:

Ricoh PRIPORT JP1210, Руководство по эксплуатации, Страница: 95 / 144

Результаты поиска

Содержание PRIPORT JP1210

Отзывы: