Ricoh PJ X5260, Руководство пользователя

Страница: 24 / 60

English
Basic Operations
Powering On the Projector
Ensure that the power cord and signal cable are securely
connected. The Power indicator will turn red.
Remove the lens cap.

Turn on the lamp by pressing “Power” on the control panel
or the remote control.

The Power indicator will flash blue.
The startup screen will display in approximately 5 seconds.
After the screen disappears, the Power indicator will turn
blue.
The first time you use the projector after purchase, the lan -
guage menu is displayed after the startup screen.
(See page 37)
Turn on your source (computer, notebook, video player,
etc.) The projector will detect your source automatically.
1.
2.
3.
4.
Powering On/Off the Projector
Turn on the projec-
tor first and then the
signal sources.

Note
Lens Cap
Power
CAUTION:
Do.not.look.into.the.lens.while.the.lamp.is.on..The.strong.light.from.the.lamp.may.
cause.damage.to.your.eyesight.
Do not block the air intake or exhaust. Doing so could cause a fire due to internal
overheating.
Do.not.place.your.hands,.face,.or.other.objects.near.the.air.exhaust,.the.lamp.cover.
or.the.bottom.of.the.unit..Doing.so.could.result.in.injury.and/or.damage.the.object.
•
•
•
If you connect
multiple sources
at the same time,
press “Input” or
use “Computer1”,
“Computer2”, “S-
Video”, “Video”,
“HDMI” on the
remote control to
switch inputs.

Note
2
1
OR