Ricoh PJ X3340, Руководство по эксплуатации

Страница: 50 / 104

Item Default
Auto Set Signals
Automatically adjust the items in [Detailed Signal Settings].
This function is available when you select [Computer 1] or [Computer 2]
as an input signal.
-
Detailed Signal Settings > Phase
Adjust to eliminate image flicker.
This function is available when you select [Computer 1] or [Computer 2]
as an input signal.
0 to 31
*1
Detailed Signal Settings > Frequency
Adjust to eliminate moiré patterns and flicker when you project images
with thin vertical-stripes.
This function is available when you select [Computer 1] or [Computer 2]
as an input signal.
0
Detailed Signal Settings > H-position
Adjust the horizontal position of the image.
This function is available when you select [Computer 1] or [Computer 2]
as an input signal.
0
Detailed Signal Settings > V-position
Adjust the vertical position of the image.
This function is available when you select [Computer 1] or [Computer 2]
as an input signal.
0
Detailed Signal Settings > Clamp Pulse 1
Adjust the clamp pulse position.
This function is available when you select [Computer 1] or [Computer 2]
as an input signal.
0 to 255
*1
Detailed Signal Settings > Clamp Pulse 2
Adjust the clamp pulse width.
This function is available when you select [Computer 1] or [Computer 2]
as an input signal.
0 to 255
*1
*1 The default of [Phase], [Clamp Pulse 1], and [Clamp Pulse 2] is variable because the projector automatically
adjusts these settings according to the input signal.
3. Changing the Projector Settings
48