Ricoh PJ WXC1110, Руководство пользователя

Страница: 30 / 82

28
English
Basic Operations
Powering On the Projector
1. Ensure that the power cord, AC adapter, and signal cable are
securely connected. The Power indicator will start flashing
amber.
2. Remove the lens cap.

3. Turn on the projector by pressing “Power” on the control
panel or the remote control.

The startup screen will display in approximately 3 seconds.
After the screen disappears, the Power indicator will turn
blue.
The first time you use the projector after purchase, the
language menu is displayed after the startup screen.
4. Turn on your source (computer, video player, etc.) The
input source is determined by the last connected input
source. (By default, the input source of the projector is set
to Multimedia). Change the input source of the projector if
necessary.
Powering On/Off the Projector
CAUTION:
• Do not look into the lens while the projector is on. The strong light from the lamp
may cause damage to your eyesight.
• Do not block the air intake or exhaust. Doing so could cause a fire due to internal
overheating.
• Do not place your hands, face, or other objects near the air exhaust or the bottom of
the unit. Doing so could result in injury and/or damage the object.
• Do not block the light from projection lens by anything when you want to stop
projection. Doing so could cause a fire due to heating by strong light. Please use
“Mute” function for this purpose.

If you connect
multiple sources at
the same time, use the
“Input” on the remote
control.

Turn on the projector
first and then the signal
sources.
Note
Lens Cap
Input Aspect
Power
Picture AV Mute
Exit Menu
Magnify
Power
1
2
OR