Ricoh PJ WX4141, Руководство по эксплуатации

Страница: 23 / 104

Operating Multiple Projectors with the Remote Control
You can operate multiple projectors with a single remote control. It is possible to operate a maximum of
four projectors. To operate the projector with the remote control, you must assign the same ID number to
the projector and remote control. Projectors that can be operated by the remote control supplied with
this projector are RICOH PJ WX4141/WX4141N/WX4141NI.
Use the following procedure to assign the same ID number to the projector and the remote control.
Assigning an ID number to the projector
To operate multiple projectors with a single remote control, assign a different ID number to each
projector. Use the buttons on the control panel to perform the following procedure.
1. Press the [Menu] button.
2. Select [Default Settings 2], and then press the [ ] button.
3. Select [Remote Control ID], and then press the [Enter] button.
4. Select the ID number to assign to the projector, and then press the [Enter] button.
CZE131
5. Select [OK] on the confirmation screen, and then press the [Enter] button.
6. Press the [Menu] button to close the menu screen.
Changing the remote control's ID number
You can switch the ID number of the remote control to match the ID number of a projector. You can
check the ID numbers of projectors in [Remote Control ID] in [Default Settings 2].
How to Use the Remote Control
21