Ricoh PENTAX K-3, Руководство по эксплуатации

Страница: 90 / 123

6
Ap
pend
ix
88
Error Messages
Error Messages Description
Memory card full
The memory card is full and no more
images can be saved. Insert a new
memory card or delete unwanted files.
No image
There are no images that can be played
back on the memory card.
This image cannot be
displayed
You are trying to play back an image in a
format not supported by this camera. You
may be able to play it back on a computer.
No card in the camera
There is no memory card inserted in the
camera.
Memory card error
The memory card has a problem, and
image capture and playback are
impossible. You may be able to play it
back on a computer.
Failed to initialize the Eye-Fi function
when using the Eye-Fi card. Press
E .
Card is not formatted
The memory card you have inserted is
unformatted or has been previously used
on another device and is not compatible
with this camera. Use the card after
formatting it with this camera.
Card is locked
The write-protect switch on the memory
card you have inserted is locked. (p.102)
This image cannot be
magnified
You are trying to magnify an image that
cannot be magnified.
This image is protected
You are trying to delete an image that is
protected. Remove protection from the
image. (p.75)
Not enough battery
power remaining to
activate Pixel Mapping
Appears during Pixel Mapping, Sensor
Cleaning, or when trying to update the
firmware if the battery level is insufficient.
Install a fully charged battery.
Not enough battery
power remaining to
clean sensor
Not enough battery
power remaining to
update the firmware
Unable to update firmware.
There is a problem with the
firmware update file
Unable to update the firmware. The
update file is damaged. Try downloading
the update file again.
Image folder cannot be
created
The maximum folder number (999) is
being used, and no more images can be
saved. Insert a new memory card or
format the card.
Unable to store image
The image could not be saved because of
a memory card error.
The operation could not be
completed correctly
The camera was unable to adjust the
manual white balance. Try the operation
again.
No more images
can be selected
You are trying to select more than the
maximum number of images for the
following functions.
• Select & Delete
• Image Copy
• Index
• RAW Development
• Protect
• Eye-Fi Image Transfer
No image can be processed
There are no images that can be
processed using the Digital Filter or RAW
Development function.
This image cannot be
processed
Appears when you try to perform Resize,
Cropping, Digital Filter, Movie Edit, RAW
Development, or Save as Manual WB for
images captured with other cameras, or
when you try to perform Resize or
Cropping for minimum file size images.
The camera failed
to create an image
The creation of an index print image
failed.
Error Messages Description