Ricoh Pentax K-3 II, Руководство по эксплуатации

Страница: 61 / 120

3
Shoo
ting
59
Expands the dynamic range and enables a wider range of tones
to be recorded by the CMOS sensor and reduces the
occurrence of overexposed/underexposed areas.
Set the correction functions from [D-Range Settings] of the
A 2
menu or the control panel.
u Caution
• When the sensitivity is set to less than ISO 200, [Highlight
Correction] cannot be set to [ON].
t Memo
• [Highlight Correction] in C mode can be set to [AUTO] or
[OFF].
Takes three consecutive images at three different exposure
levels to create a single composite image with them.
1
Select [HDR Capture] in A 1 menu and press D .
The [HDR Capture] screen appears.
2
Select the capture type and
press
E .
3
Set the range in which to change the exposure in
[Exposure Bracket Value].
Select from [±1EV], [±2EV], or [±3EV].
4
Set whether to use Auto Align or not.
5
Press F twice.
The camera returns to standby mode.
u Caution
• HDR Capture is not available in T , M , or N mode.
• This function cannot be used in combination with some other
functions. (p.87)
• When the drive mode is set to [Interval Shooting], [Auto Align]
is fixed to S (Off).
• In C mode, HDR Capture is available only when the drive
mode is set to [Interval Movie Record].
• For HDR Capture, multiple images are combined together to
create a single image, so it may take time to save the image.
Correcting Images
Brightness Adjustment
Highlight Correction/Shadow Correction
A
2/
v
HDR Capture A 1/ v
Cancel Cancel OK OK
HDR Capture HDR Capture
Exposure Bracket Value
Exposure Bracket Value
Auto Align
Auto Align
HDR Capture HDR Capture
T
Uses Auto Align.
S
Does not use Auto Align.