Ricoh Mv106, Руководство оператора

Страница: 50 / 111

Saving Energy
To print a fax message your fax machine uses a heating roller to fuse the image
to the paper. This roller must already be hot when the paper passes under it.
To maintain a temperature high enough to permit proper fusing, electricity is
consumed. This facsimile is equipped with various energy saving modes to
reduce the consumption of electricity while the machine is waiting for a fax
message.
Letting the heating roller cool to room temperature will reduce the amount of
electricity the fax machine consumes. However, the fax machine will not print
incoming messages right away, it will store them in memory and print them out
after the roller warms up.
Letting the heating roller cool halfway reduces the amount of electricity the fax
machine consumes, but not as much as letting it cool to room temperature. On
the other hand, since warming up takes only a short time, incoming fax
messages can be printed right away.
If your fax machine enters saving energy mode, SAVING ENERGY appears on
the display.
The saving energy mode is related to the Night Timer. Refer to the section titled
"Night Timer".
How to start the saving energy mode
Your machine will enter the saving energy mode when machine is not used for
5 minutes.
If you want to change the five minute period to one or three minutes, or if you
do not want your machine to enter the saving energy mode automatically,
please contact your service representative.
How to exit the saving energy mode
Your machine exits from the energy saving mode.
❐
When a fax is received. (If the night timer is on, the message will printed out
after the night timer ends.)
You can still send a fax while the machine is in saving energy mode.
You can also carry out some functions (e.g. programming) by first holding down
a key to switch to standby mode.
OTHER FEATURES Saving Energy
42