Ricoh MP6200A, Руководство пользователя

Страница: 9 / 26

6
The MP 6200AR Series
3.2 Rear panel
Name Function
Power Connector Connects to the power supply (5- and 12-V
DC) of the host computer.
Be careful to connect with the proper po-
larity. Connecting the wrong way may dam-
age the system (and is not guaranteed).
IDE Interface Connector Connect to the IDE (Integrated Device Elec-
tronics) interface using a 40-pin flat IDE cable.
Do not connect or disconnect the cable
when the power is on, as this could cause
a short circuit and damage the system.
Always turn the power OFF when connect-
ing or disconnecting the cable.
Jumper Connector This jumper determines whether the drive is
configured as a master or slave. Changing
the master-slave configuration takes effect
after power-on reset.
Analog Audio Output Provides output to a sound card
Connector (analog signal).
Digital Audio Output Not used.
Connector
Power connector
Digital Audio Output
Connector
Analog Audio Output
Connector
IDE Interface Connector
Jumper Connector