Ricoh MP 6503 Series Скачать руководство пользователя страница 223

Страница: 223 / 252

When data transmission fails

Message

Cause

Solution

"Authentication with the
destination has failed. Check
settings. To check the current
status, press [Scanned Files
Status]."

The entered user name or
password was invalid.

• Check that the user name and

password are correct.

• Check that the ID and password

for the destination folder are
correct.

• A password of 128 or more

characters may not be
recognized.

"Exceeded max. email size.
Sending email has been
cancelled. Check [Max.
Email Size] in Scanner
Features."

The file size per page has
reached the maximum e-
mail size specified in
[Scanner Features].

Change the scanner features settings
as follows:

• Increase the e-mail size limit in

[Max. Email Size].

• Change the [Divide & Send

Email] setting to [Yes (per Page)]
or [Yes (per Max. Size)]. For
details about these settings, see
"Send Settings", Scan.

"Sending the data has
failed. The data will be
resent later."

A network error has
occurred and a file was not
sent correctly.

Wait until sending is retried
automatically after the preset interval. If
sending fails again, contact your
administrator.

"Transmission has failed.
Insufficient memory in the
destination hard disk. To
check the current status,
press [Scanned Files
Status]."

Transmission has failed.
There was not enough free
space on the hard disk of the
SMTP server, FTP server, or
client computer at the
destination.

Allocate sufficient space.

"Transmission has failed. To
check the current status,
press [Scanned Files
Status]."

While a file was being sent,
a network error occurred
and the file could not be sent
correctly.

If the same message appears again
after scanning again, the cause could
be a mixed network, or network
settings were changed during WSD
scanner transmission. For details about
network error, contact your
administrator.

Messages Displayed When You Use the Scanner Function

221

Содержание MP 6503 Series





























































































































































































































































Результаты поиска

Содержание MP 6503 Series

Отзывы:

Похожие инструкции для MP 6503 Series

Бренды по названию

Популярные бренды

Ricoh MP 6503 Series, Руководство пользователя

Результаты поиска

Содержание MP 6503 Series

Отзывы:

Похожие инструкции для MP 6503 Series

Бренды по названию

Популярные бренды