Ricoh MP 2001L Скачать руководство пользователя страница 91

Страница: 91 / 120

4. User Tools (Copier Features)

Accessing User Tools (Copier Features)

This section is for administrators in charge of this machine.
Administrators can change or make default settings.

• Be sure to quit User Tools and return to the initial copy display when all settings are complete. This

section describes system settings for the copier function.

• Selected settings are highlighted.
• Any changes made with User Tools remain in effect even if the main power switch or operation

switch is turned off, or the [Reset] key is pressed.

• For details, see "User Tools (System Settings)", General Settings Guide.

Changing Default Settings

• If an administrator code is set, the administrator code input display appears before you can

change the default settings. For details about access codes, see "Administrator Tools", General
Settings Guide.

Press the [User Tools/Counter] key.

CUA023

Содержание MP 2001L

























































































































Результаты поиска

Содержание MP 2001L

Отзывы:

Ricoh MP 2001L, Руководство по эксплуатации, Страница: 91 / 120

Результаты поиска

Содержание MP 2001L

Отзывы: