Ricoh M018, Руководство по обслуживанию

Страница: 193 / 229

Service Menu
SM Appendix 4-1 M018/M019
Appe
ndix:
SP
Mode
Ta
b
le
s
4. APPENDIX: SP MODE TABLES
4.1 SERVICE MENU
4.1.1 OVERVIEW
This model has several service menus. Each service menu has several adjustment items.
This section explains how to enter each service menu and what you can do in each service
menu.
Each menu is classified into two "Modes" depending on how you enter the service menus.
ƒ "Menu Mode" can be executed by depressing the following key sequence while in ready
condition:
Clear/Stop, 1, 0, 7 and Clear/Start. (Press and hold each key till a beep is heard.)
ƒ "Special Mode" is needed to input the serial number after the Engine Board EEPROM
has been replaced. Please contact your Technical Service Manager for details.
Each menu is classified as follows:
Menu Mode Function
Maintenance Mode Menu This is a menu for maintenance and service.
Special Mode This mode is used to input the serial number.
Fax Service Test Menu This is a menu for checking the fax mode.
4.1.2 MAINTENANCE MODE MENU
Selecting an Item
To select an item, press the "Up" or "Down" key.
Going into the Next Level/ Returning to the Previous Level
ƒ To go into the next level of an item, select an item then press the "OK" key.
ƒ To return to the previous level of an item, press the "Return" key.
Exiting the Maintenance Mode Menu
To exit the maintenance mode menu, press the "Clear/Stop" or "Return" key until the
"Ready" display appears.
⇒
Rev. 09/29/2010