Ricoh LD320d, Сетевое руководство, Страница: 18 / 34

Windows Configuration
12
4
Configuring a Windows XP
Computer
Follow the procedure below to con-
figure a Windows XP computer to use
TCP/IP.
A
On the [ Start ] menu, click [ Control
Panel ] , and then click [ Network Con-
nections ] .
B
Click [ Network Connections ] , and
then double-click [ Local Area Con-
nection ] .
C
On the [ General ] tab, click [ Proper-
ties ] .
D
Make sure [ Internet Protocol (TCP/IP) ]
is selected in the [ This connection
uses the following items ] box on the
[ General ]
tab.
Note
❒
Select TCP/IP if it is not already
selected.
❒
If TCP/IP is not installed, click
[ Install ] on the [ General ] tab to in-
stall it. For details about install-
ing TCP/IP, see Windows XP
Help.
E
Click
[ Properties ]
.
F
Configure TCP/IP using the ap-
propriate IP address, subnet
mask, and other settings.
Check with the network adminis-
trator that the settings are correct.
Configuring a Windows Server
2003 computer
Follow the procedure below to con-
figure a Windows Server 2003 com-
puter to use TCP/IP.
A
On the [ Start ] menu, point to [ Con-
trol Panel ] , point to [ Network Connec-
tions ] , and then click [ Local Area
Connection ]
.
B
On the [ General ] tab, click [ Proper-
ties ] .
C
Make sure [ Internet Protocol (TCP/IP) ]
is selected in the [ This connection
uses the following items ]
box on the
[ General ] tab.
Note
❒
Select TCP/IP if it is not already
selected.
❒
If TCP/IP is not installed, click
[ Install ] on the [ General ] tab to in-
stall it. For details about install-
i n g T C P / I P , s e e W i n d o w s
Server 2003 Help.
D
Click [ Properties ] .
E
Configure TCP/IP using the ap-
propriate IP address, subnet
mask, and other settings.
Check with the network adminis-
trator that the settings are correct.