Ricoh LD055 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 468

Ricoh LD055 Скачать руководство пользователя страница 37

Copy Paper

29

1

Note

❒

Do not use the following kinds of paper or a misfeed might occur.
• Bent, folded, or creased paper
• Torn paper
• Slippery paper
• Perforated paper
• Rough paper
• Thin paper that has low stiffness
• Paper with much paper dust on its surface

❒

If you make a copy on rough grain paper, the copy image might be blurred.

❒

Do not use paper which has been copied or printed on.

Paper Storage

Note

❒

When storing paper, the following precautions should always be followed:
• Do not store paper where it will be exposed to direct sunlight.
• Avoid storing paper in humid areas (humidity: 70% or less).
• Store on a flat surface.

❒

Keep open reams of papers in the package, and store as you would unopened
paper.

❒

Under high temperature and high humidity, or low temperature and low hu-
midity conditions, store paper in a vinyl bag.

«
...
35
36
37
38
39
...
»

Содержание LD055





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов