manualshive.com logo in svg

Ricoh K-C3.5L, Обучение по обслуживанию

Поделиться
Скачать
Ricoh K-C3.5L Скачать руководство пользователя страница 107

Model K-C3.5L

107

Ricoh Co. Ltd.

http://www.ricoh.com/

Slide 107

Offset when Making Many Copies on 

Narrow Paper

‰

Target fusing temperature lowered by 10

°

C 

Š

If the smallest copy paper width detected during a 
40-second interval is less than 220 mm.

‰

Target fusing temperature lowered by another 
5

°

C

Š

If, during the next 80 seconds, the smallest width 
detected is again less than 220 mm.

More on Offset when Making Copies

‰

If narrow paper is fed through the fusing unit continuously, the temperature at the 
ends of the rollers becomes higher than at the center.

¾

This is because paper is not drawing heat away from the ends.

‰

Then, if a wider paper is used soon after, the higher temperature could cause 
offset to appear at the sides of the copy.

¾

This is very likely when making several copies of an original with many 
pages using the rotation sort feature (sets of copies are made with SEF and 
LEF paper alternately – the ends of the rollers heat up when making a copy 
on SEF paper, then offset will appear when making the next set on LEF 
paper).

‰

The machine deals with this as explained on the slide.

¾

However, note that if A6 is detected, the temperature increases 10

°

C as 

explained earlier (Thick paper from the By-pass Tray).

Содержание K-C3.5L


































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды