Ricoh Interactive Whiteboard Controller Type 2, Руководство по эксплуатации

Страница: 129 / 344

Opening Administrator Settings
• If the administrator password is not set, you cannot use the whiteboard function. If a machine
system that is using version 3.5.X.X or earlier is updated to version 3.6.0.0 while its administrator
password is still "admin", you cannot change any settings in [Administrator Settings] unless you first
change the administrator password. Set or change the administrator password. For details about
changing the administrator password, see page 162 "Administrator Settings".
1. On the top page of the machine's Web page, click [Administrator Settings].
2. Enter the administrator password in the password entry field.
3. Click [OK].
The configuration screen for the administrator appears. Confirm and modify the device settings as
required. You can also check whether there are any applicable Windows updates and the date
and time that the last Windows update was applied are displayed. To install updates, restart or
shut down the machine from the Web page of the machine. For details, see page 128 "Restarting
or Shutting Down the Machine from Its Web Page". You can also specify the settings to install
Windows updates when auto shutdown or auto restart occurs. For details, see page 214
"Changing the Security Settings".
• If the administrator setting is configured on the machine's Web page, the setting becomes valid
when the machine restarts.
• If no operations are performed for a specified time, you are logged out automatically. When this
happens, click [Administrator Settings] again on the top page.
• The administrator settings screen cannot be opened from the Web page while the administrator
settings are being configured on the control panel of the machine.
• If you close the Web page without logging out, you cannot log in to [Administrator Settings] for 10
minutes.
• For details about the administrator settings, see page 162 "Administrator Settings".
• Some settings cannot be configured from the Web page. Also some settings such as the user
authentication settings cannot be configured from the machine.
Opening Administrator Settings
127