InfoPrint Solutions Company Europe, Middle
East, and Africa Hardware Announcement
ZG09-0303
InfoPrint is a registered trademark of Ricoh Co., Ltd.
6
Electrical specifications
Low-voltage models
• 100 - 127 V ac at 50 - 60 Hz, nominal
• 90 - 137 V ac, extreme
High-voltage models
• 220 - 240 V ac at 50 - 60 Hz (not available in all countries)
• 198 - 259 V ac, extreme
Average power consumption
The following table specifies nominal average power requirements for the base
printer configuration for InfoPrint 1985.
Printing states All models
Off .35 W
Power saver mode 8 W
Ready mode 100 W
Simplex printing 700 W
Duplex printing 560 W
Typical electricity consumption test
Normal mode 6.00 kwh/wk
Eco mode 4.52 kwh/wk
Maximum current while printing
115 Volts 12 A (rms)
230 Volts 8 A (rms)
Note:
All duplex models are Energy Star compliant.
Acoustics
All measurements were made in accordance with ISO 7779 and reported in
conformance with ISO 9296.
1 meter average Declared
sound pressure sound power
Mode level (dBA) level (Bels)
Simplex 55 7.1
Duplex 58 7.4
Ready 22 3.8
Planning information
Customer responsibilities
This printer is designed as Customer Setup Unit (CSU). The customer is responsible
for:
• Adequate site, system, and other vendor preparation
• Receipt at the customer location and placement of the printer
• Installation and configuration of the printer and features by following the
installation instructions, including:
– Installing and maintaining cables
– Loading print media and clearing jams
– Performing low-level problem determination
– Ordering and installing supplies and consumables
• Working with InfoPrint Solutions Technical Support to complete low-level problem
determination including:
