Ricoh Image Pointer GP01, Руководство пользователя

Страница: 36 / 60

34
English
User Settings
Internet
To connect the projector to the WiFi, do the following:
1. Open “Menu” > “Setup” > “WiFi Setting” and press “Display/
Enter” on the control panel.
2. Select the “Internet” tab.
3. Do either of the following:
• Select your preferred wireless access point from the list to
make the connection. If the WiFi is password-protected,
enter the password at the prompt. Then press the “Menu”
key to close the onscreen keyboard, and press “OK”.
• If the wireless access point is not available, connect your
portable device directly to the projector’s hotspot. The
WiFi name (Device Name) and the password (Password)
are displayed on the Internet tab.
WiFi Setting

To start wireless
screen casting, connect
your portable device and
the projector to the same
wireless access point.
Note

The default device
name is “IMPXXXXX”
where the “XXXXX” are
the five last numbers
of the product Serial
Number. For example,
“IMP00099”.
Note