Ricoh GR Digital II Скачать руководство пользователя страница 169

Страница: 169 / 186

ppendic

167

External Flash

An optional external TTL flash unit (GF-1) can be connected to the camera

hot shoe and used as a TTL auto flash.

Close the flash cover.

Remove the hot shoe cover from the

hot shoe of the camera.

Turn the camera and the external flash

unit off and attach the flash to the

camera hot shoe.

Turn the external flash and camera on.

Caution -------------------------------------------------------------------------------------------------------

• Do not open the built-in flash when using the external flash as this can result in malfunction or dam-

age to the products.

• Turn the external flash off before removing it from the camera.
• Use the external flash at ranges that exceed the range of the built-in flash. Shooting at a short dis-

tance with an external flash may result in over-exposure of the subject.

• When an external flash other than the GF-1 is used, you cannot set the flash mode. The flash always

operates with [Flash On].

Note -----------------------------------------------------------------------------------------------------------

• If the external flash icon is not displayed, turn the GF-1 and camera off and then remove and reattach

the flash.

• Press the

(

) button to change the flash mode. (p.79) To fire the flash manually, do so from the

GF-1. The output can be set in [Manual Flash Amount] of the [Shooting] menu. (p.82)

Hot shoe

Содержание GR Digital II



























































































































































































Результаты поиска

Содержание GR Digital II

Отзывы:

Похожие инструкции для GR Digital II

Бренды по названию

Популярные бренды

Ricoh GR Digital II, Руководство по эксплуатации

Результаты поиска

Содержание GR Digital II

Отзывы:

Похожие инструкции для GR Digital II

Бренды по названию

Популярные бренды