Ricoh Gestetner DSm7110 Скачать руководство пользователя страница 84

Страница: 84 / 232

Copying

Sample copy

You can use this function to check the copy settings before making a long copy
run.

Important

❒

This function can be used only when the Sort function is turned on.

Select Sort and any other necessary functions, and the place the originals.

Press the

{

Sample Copy

}

key.

One copy set is delivered as a sample.

If the sample is acceptable, press

[

Continue

]

The number of copies made is the number specified, minus one for the proof
copy.

Note

❒

If you press

[

Suspend

]

after checking the results, you can return to step

You can change the settings for Staple, Punch, Duplex (1 Sided

→

1 Sided,

1 Sided

→

2 Sided), Orientation, Margin Adjust., Cover Sheet, and Desig-

nate. However, depending on the combination of functions, you may not
be able to change some settings.

APG019S

Содержание Gestetner DSm7110









































































































































































































































Результаты поиска

Содержание Gestetner DSm7110

Отзывы:

Ricoh Gestetner DSm7110, Руководство по эксплуатации, Страница: 84 / 232

Результаты поиска

Содержание Gestetner DSm7110

Отзывы: