Ricoh Gestetner DSm7110, Руководство по эксплуатации, Страница: 204 / 232

Document Server
184
4
Changing Number of Print Copies while Printing is in Progress
Following describes the procedure for changing the number of print copies after
printing is stared.
Important
❒
This feature is enabled when the sort function is selected in the printing con-
ditions.
A
Press the
{
Stop
}
key.
B
Press [ Change Quantity ] .
C
Enter the number of print copies anew from the number keys.
D
Press the
{
q
}
key.
E
Press [ Continue ] .
Printing will be resumed.
Note
❒
The range of print copies enterable in step
C
depends on the timing of your
pressing the
{
Stop
}
key.
Sample Print
When print copies are massive, you can print a single copy in advance to check
appropriateness of the printing order of the selected documents and the printing
conditions.
Important
❒
This feature is enabled when the sort function is selected in the printing conditions.
A
Select the document to be printed.
When a password is set, enter it and then press [ OK ] .
B
Press [ To Printing Screen ] .
C
Press the
{
Sample Copy
}
key.
Only one copy will be printed.