Ricoh Gestetner DSm7110 Скачать руководство пользователя страница 178

Страница: 178 / 232

Connect Copy

158

Copying Stored Documents Using Connect Print

You can print a document stored in the Document Server using the Connect
Print function.

Note

❒

The main machine is the one on which the document is stored.

Press the

{

Document Server

}

key.

Select the document to be printed.

The selected document is highlighted.

Repeat step if you want to select more documents.

The documents will be printed in the order that they have been selected.

If you need to change the print settings, press

[

To Printing Screen

]

If you do not need to change any settings, proceed to step

Press

[

Connect Print

]

The key is highlighted and the two machines are connected.

Enter the required number of copies using the number keys.

The maximum copy quantity that can be set is 9999.

Press the

{

Start

}

key.

Содержание Gestetner DSm7110









































































































































































































































Результаты поиска

Содержание Gestetner DSm7110

Отзывы:

Ricoh Gestetner DSm7110, Руководство по эксплуатации, Страница: 178 / 232

Результаты поиска

Содержание Gestetner DSm7110

Отзывы: