Ricoh Gestetner DSm7110 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 232

Ricoh Gestetner DSm7110 Скачать руководство пользователя страница 34

Placing Originals

14

1

Originals not recommended for the Auto Document Feeder (ADF)

Placing the following types of originals in the ADF can cause paper misfeeds or
light & black lines or result in damage to the originals. Place these originals on
the exposure glass instead.
• Originals other than those specified on “Sizes and Weights of Recommended

Originals”.

• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper, alu-

minum foil, carbon paper, or conductive paper

• Originals with perforated lines
• Originals with indexes, tags, or other projecting parts
• Sticky originals such as translucent paper
• Thin, highly flexible originals
• Thick originals such as postcards
• Bound originals such as books
• Transparent originals such as OHP transparencies or translucent paper
• Originals that are still wet with ink or white-out.

Note

❒

The original might become dirty if it is written with a pencil or a similar tool.

«
...
32
33
34
35
36
...
»

Содержание Gestetner DSm7110









































































































































































































































Отзывы:

Нет отзывов