Ricoh Fiery E-820, Руководство по настройке

Страница: 171 / 190

A
A-3 Token Ring Network Option
IPX/SPX installations
If your network uses IPX/SPX protocols with Token Ring, configure at least one
printer, one E-820 Print Server, and one E-820 Print Queue on the NetWare server as
described in
“Configuring a NetWare 4.x server for printing” on page 2-10. You can
configure up to eight bindery servers and one NDS tree connection to the E-820.
This total is the same whether the E-820 is connected by Token Ring, Ethernet, or
both. For more information, see
“Setting up an NDS connection” on page 2-12.
TCP/IP installations
If your network uses TCP/IP protocols with Token Ring, configure at least one
printer and one E-820 queue on a Windows NT/2000 server (see
“Configuring a
Windows NT 4.0/2000 server to communicate with the E-820” on page 2-3) or
UNIX server (see “Setting up the E-820 on TCP/IP networks” on page 2-18).
Setting up Token Ring on the E-820
Token Ring Setup on the Control Panel is similar to Ethernet Setup. From Network
Setup, perform Port Setup, Protocol Setup, and Service Setup. The setups you need are
summarized in the table on
page 4-14 .
N
OTE
:
Connect the Token Ring cable before doing E-820 Network Setup, so that the
Token Ring card can configure itself properly.
Setting up NetWare Windows clients
Client setup is exactly the same as for IPX clients using Ethernet. For details, see
“Setting up NetWare Windows clients for printing” on page 2-13.