Ricoh FACSIMILE FAX77, Руководство по обслуживанию на месте

Страница: 83 / 197

Bit Switch B
BIT FUNCTION
DATA COMMENTS
0 Transmission report 0: Enabled 1: Disabled This has the same effect as Function 56.
1 Error report 0: Enabled 1: Disabled The error report is printed if an error occurred during com-
munication. It contains an error code.
2
Automatic Journal
0: After every 35 com- The Journal informs the user about recent communications, in-
output munications cluding the date, time, duration, other party name, and result.
1: Disabled If this bit is 0, it is automatically printed after every 35 com-
munications. If it is 1, it is only printed if the user executes
Function 70.
3 Journal memory 0: Disabled 1: Journal data is cleared from memory after printing using
clear after output
1: Enabled Function 70.
4 Printout of RTI/CSl 0: Disabled 1: The other end’s RTI or CSI will be printed on the top of
on received mes-
1: Enabled received pages at this end.
sages
5
Clearing the report
1: Clear the reports and To clear the memory areas holding the counters and report
memory and the
counters data, set this bit to 1, then press Function. The memory will be
counters reset to the factory settings and this bit will reset to 0. The af-
fected areas are as follows: Tx/Rx/Scan/Print counters, Jour-
nal, Service Report, Error Report, error code memory.
Continued on the next page
2-52