4
EV-G030B1 / EV-G200C1 / EV-G200B1
Specifications Rev. 1.00
1 Specifications
1.1
Electronic specifications / Mechanical specifications / Environmental specifications EV-G030B1
Noise level
at 8bit output
at 10bit output
at 12bit output
Minimum scene illumination
Protocol
ALC
AOI function
Smear reduction
Color interpolation
Input voltage
Consumption
Material
Lower limit
Higher limit
No filter
EV-G030B1
1/3" interline VGA monochrome
progressive CCD: ICX424AL
0.58 Lux at F1.2, 89.91172Hz
Digital 8, 10 or 12 bit Raw data
Gamma 1.0 (Factory default) or downloadable gamma table
Programmable AOI setting via the communication
Selectable ON/OFF via communication
Standard compliancy
EMS: EN61000-6-2, EMI: EN55011 Group 1 Class A
RoHS
RoHS compliant
Environmental
specifications
Operational
temperature
Environmental temperature -5 deg. C
Camera housing temperature (Top plate): 70 deg. C (Check "Operational temperature and power consumption")
Storage temperature
Environmental temperature -30 to 65 deg. C
Vibration
20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
Shock
Acceleration 38G, half amplitude 6ms, 3 directions 3times each
Power/IO connector: HR10A-10R-12PB (Hirose) or equivalent
DC IRIS lens connector: M1951 (EMUDEN) or equivalent
Camera mount screws
Two 1/4" Tripod screw holes (one each on top and bottom plate)
Sixteen M4 screw holes (four each on top, bottom and both sides plate)
Weight
Approximately 170 g
Positional accuracy in H and V directions: +/- 0.3 mm
Rotational accuracy of Ha nd V: +/- 1.5 deg.
Aluminum (AC)
Lens mount
C mount
Connectors
RJ45 connecor
Auto IRIS lens control
Not available
Power
+10.8 to +26.4Vdc through power/IO connector or Power Over Ethernet
(Auto detection with power/IO connector prioritized)
Mechanical
specifications
Dimensions
50 (W) x 50 (H) x 53.5 (D) mm excluding connectors
Optical filter
Optical center accuracy
Not available
Not available
I/O's
UART communication through Ethernet port
White Balance function
Three opt isolated inputs and five opt isolated outputs
Communication
Edge preset trigger, pulse width trigger (unlimited long exposure)
Exposure time
Preset continuous mode: 10 useconds to 16,777,216 useconds
Preset trigger mode: 10 useconds to 16,777,216 useconds
Pulse width mode: 10 useconds to Unlimited
AGC (ON/OFF)
Gain
0 to 20.4 dB
<= 48 Digit (Gain 0 dB)
Internal
Video output
Interface
PoE : IEEE802.3af CLASS3 (1000BASE-T)
GigE Vision 1.2 and GeniCam 2.0 compilant
Maximum frame rate of the camera (360.33325 Hz) is 104 vertical resolution AOI setting
Horizontal frequency
47.2028 kHz
36.818175 MHz
<= 3 Digit (Gain 0 dB)
<= 12 Digit (Gain 0 dB)
Scanning system
Progressive
Vertical frequency (Frame rate)
89.91172 Hz at full resolution
0.72028 to 360.33325 Hz changeable via the communication
Maximum frame rate is depending on the AOI setting
692 (H) x 504 (V)
Active picture elements
VGA: 648 (H) x 494 (V)
*EV-G003B1: With respect to the entered size, the 15 pixels above and below, and the 0 to 14th
pixels and 633rd to 647th pixels on the left and right sides will be blacked out.
Chip size
5.79 (H) x 4.89 (V) mm
7.4 (H) x 7.4 (V) µm
Product
Electronic
specifications
Imager
Total picture elements
Cell size
Pixel frequency
Sync. System
Gamma
Trigger mode
Less than 6.5 W
/ FCC 47CFR Part 15 Subpart B Class A
（Verification） / ICES-003（Class A）
