background image

A-8

 

CAUTION:

• 

If you do not use the machine for a long period of time such as consecutive 
holidays, be sure to disconnect the power cord plug from the wall outlet for 
reasons of safety.

• 

Be sure to push the power cord plug fully into the wall outlet. Also, do not 
push it into loose and unstable wall outlets likely to cause a contact failure. 
Doing so can result in heat generation.

• 

When disconnecting the power cord from the wall outlet, make sure to pull 
the plug, not the cord. Do not pull the power cord forcibly. Doing so can 
damage the power cord, possibly resulting in fire or electric shock.

• 

Be sure to disconnect the plug from the wall outlet and clean the prongs 
and the area around the prongs at least once a year. Allowing dust to build 
up on the plug constitutes a fire hazard.

• 

When performing maintenance on the machine, disconnect the power cord 
from the wall outlet for safety.

Power Source
100-240 V, 3 A, 50/60 Hz
Please be sure to connect the power cord to a power source as above.

Handling the main machine

This section explains safety precautions about handling the main machine.

 

WARNING:

• 

The following explains the warning messages on the plastic bag used 

in this product’s packaging:

• 

 Do not leave the polythene materials (bags, etc.) supplied with 

this machine close to babies and small children. Suffocation can 

result if polythene materials are brought into contact with the 

mouth or nose.

• 

If the machine topples or a cover or other part is damaged, turn off the 

power immediately. After disconnecting the power cord plug from the 

wall outlet, contact your service representative. Using the machine 

continuously can result in fire or electric shock.

Содержание E-25C



























Отзывы: