Ricoh D5510, Руководство пользователя

Страница: 38 / 52

• Do not place the machine on an unstable or tilted surface. If it topples over, an injury might
occur.
• Keep the machine away from salt-bearing air and corrosive gases. Also, do not install the
machine in places where chemical reactions are likely (laboratories, etc.), as doing so will
cause the machine to malfunction.
Stand installation precautions
• Do not hang, lean against, or step on the stand. The stand might become deformed, resulting in
an accident.
• Make sure that two or more people assemble and move this stand. Otherwise, it is likely that this
stand falls down or the display falls off so that an injury may result while the stand is being
assembled.
• To assemble and move this stand, turn off the power or disconnect cables. Otherwise, it is likely
that assembling this stand poses unexpected electric shock or fire hazard. Also, the stand may
fall down if it is caught in cables.
• The display height must be adjusted by the installer. Adjusting the display height by yourself
might cause the display to fall off the stand, tip over, and become damaged, resulting in injury.
• Assemble this stand in a wide area, and place blankets or cushions on the floor so that it will not
be damaged. Assembling the stand without using blankets and cushions may cause the floor to
be damaged.
• Raise the fall prevention metal fittings and unlock the caster stoppers when moving the stand. If
you fail to unlock the stoppers, the stand might tip over and result in an accident that damages
the stand or main unit.
• After moving the stand, lock the caster stoppers and lower the fall prevention metal fittings. If you
fail to lock the stoppers, the stand might unexpectedly move or fall down, resulting in an accident
that causes damage to the stand or main unit.
• When you assemble the stand, do not set your feet near the casters or insert your hands in
between parts. Your hands or feet might get caught, resulting in injury.
3. Setting Up the Machine
36