Ricoh D3GF, Руководство по обслуживанию на месте

Страница: 10 / 187

1.Installation
4
1.
Installation
Installation Requirements
Environment
1.
Temperature Range:
10 °C to 40 °C (50 °F to 104 °F)
2.
Humidity Range:
10% to 85% Relative Humidity (non-condensing)
3.
Ambient Illumination:
Less than 1500 lux (do not expose to direct sunlight or strong light)
4.
Ambient Dust:
Less than 0.10 mg/m
3
5.
If the place of installation is air-conditioned or heated, do not place the machine where it will be:
1) Subjected to sudden temperature changes
2) Directly exposed to cool air from an air-conditioner
3) Directly exposed to heat from a heater
6.
Do not place the machine where it will be exposed to corrosive gases.
7.
Do not install the machine at any location over 3,048 m (10,000 feet) above sea level.
8.
Place the controller on a strong and level base.
9.
Do not place the machine where it may be subjected to strong vibrations.
10.
Do not connect the machine to a power source shared with another electrical appliance.
11.
The machine can generate an electromagnetic field, which could interfere with radio or television
reception.
Machine Level
1.
Front to back: Within 5 (0.2") away from level
2.
Right to left: Within 5 (0.2") away from level