Ricoh Aficio SP C811DN Series, Руководство пользователя программного обеспечения

Страница: 133 / 384

Printing with the Finisher
You can staple or punch holes in printed paper by installing the optional finisher. Make sure you read the
following precautions when using the optional finisher.
• Make option settings for the printer using the printer driver when bidirectional communication is dis-
abled.
• Be sure to set the paper size and paper orientation in the printer driver when using duplex printing,
staple and punch functions.
• When printing restarts after removing jammed paper, the printing position may be different, depend-
ing on the location of the jam.
• If the paper jam occurred in the optional finisher, printing will restart from the top page of the
data currently being printed, or from the page where the paper jam occurred.
• If the paper jam occurred in the printer, printing will restart from the page where the paper jam
occurred.
• Even if the paper jam occurred in the printer, the error will not be cleared unless the cover of the
finisher is opened and closed.
• For information about optional finishers, see Hardware Guide.
Staple
With the optional Booklet Finisher SR3000 or Finisher SR3030 installed, sets can be stapled individually
when printing multiple sets.
Staple Position
The specified staple position varies depending on paper size, type, quantity and feed orientation. The
following table shows staple positions:
Printing with the Finisher
131
3