Ricoh Aficio SP C231 Скачать руководство пользователя страница 93

Страница: 93 / 247

INSTALLATION REQUIREMENTS

3-1

C231

Inst

allat

ion

3. INSTALLATION

3.1 INSTALLATION REQUIREMENTS

Carefully select the installation location because environmental conditions greatly
affect machine performance.

3.1.1 OPTIMUM ENVIRONMENTAL CONDITION

1. Temperature



10 to 30

C (50 to 86

2. Humidity



20 to 90 % RH 20 to70 % RH (ADF)

3. Install the machine on a strong and level base. The machine must be level

within 5 mm (0.2”) both front to rear and left to right.

3.1.2 ENVIRONMENTS TO AVOID

1. Locations exposed to direct sunlight or strong light (more than 1,500 lux).

2. Dusty

areas.

3. Areas containing corrosive gases.

4. Locations directly exposed to cool air from an air conditioner or reflected heat

from a space heater. (Sudden temperature changes from low to high or vice
versa may cause condensation within the machine.)

3.1.3 POWER CONNECTION

1. Securely connect the power cord to a power source.

2. Make sure that the wall outlet is near the machine and easily accessible.

3. Make sure the plug is firmly inserted in the outlet.

4. Voltage must not fluctuate more than 10%.

5. Avoid

multi-wiring.

6. Do not pinch the power cord.

Содержание Aficio SP C231
























































































































































































































































Результаты поиска

Содержание Aficio SP C231

Отзывы:

Ricoh Aficio SP C231, Руководство по обслуживанию, Страница: 93 / 247

Результаты поиска

Содержание Aficio SP C231

Отзывы: