Ricoh Aficio FT4027, Руководство по обслуживанию

Страница: 568 / 685

12.1.2 SP Mode Table
Mode No. Function Settings
1-001
Registration † Adjusts leading edge registration. 0 ~ 32
Default = 16 ‡
(0.5 mm per step [Range: –8.0 mm to
+8.0 mm])
1-003-001
to
1-003-008
Paper Feed
Timing † Adjusts the paper feed timing at
registration for each paper feed station.
Paper feed timing is in proportion to the
amount of paper bending [mm] at
registration. 0 ~ 32
Default = 16
SP1-003-008:
Do not adjust
this setting.
(0.5 mm per step [Range: –8 mm to + 8
mm])
1-008
Misfeed
Detection † Switches misfeed detection on or off for
test purposes (sensor signals are
ignored). Only one copy can be made at
a time, to prevent damage to the
machine. 0: OFF
1: ON
1-103
Fusing Idling † Selects the total time for the fusing idling
during machine warm-up. For type 2,
fusing idling starts when the detected
temperature reaches the operating
temperature –15
°
C. For type 1, fusing
idling starts when the detected
temperature reaches the operating
temperature.
0: OFF
1: 60 s
2: 100 s
3: 180 s
4: 300 s
Default = 100 s
(Type 1)
Default = Off
(Type 2)
The longer the selected fusing idling, the
longer time the machine takes to reach
the ready condition. After changing the
setting, turn the main switch off and on.
°1-104
Fusing
Temperature
Control † Selects the fusing lamp temperature
control mode. 0: On/Off
Control
1: Phase Control
After selecting the control mode, turn the
main switch off and on.
SP Number Without Duplex With Duplex
SP1-003-001 1st tray Duplex
SP1-003-002 2nd tray 1st tray
SP1-003-003 3rd tray 2nd tray
SP1-003-004 4th tray 3rd tray
SP1-003-005 5th tray 4th tray
SP1-003-006 By-pass By-pass
SP1-003-007 LCT LCT
SP1-003-008 Japan only
Overall
Machi
ne
In
fo
rm
a
ti
o
n
SERVICE PROGRAM MODE
SM 1-65 A207/A208/A211