Ricoh Aficio 240W Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 92

Ricoh Aficio 240W Скачать руководство пользователя страница 3

Introduction

This manual describes detailed instructions on the operation and notes about the use of this machine.
To get maximum versatility from this machine all operators are requested to read this manual carefully
and follow the instructions. Please keep this manual in a handy place near the machine.

For safe and correct use of this machine, please be sure to read the Safety Information before you use
it.

Important

Contents of this manual are subject to change without prior notice. In no event will the company be li-
able for direct, indirect, special, incidental, or consequential damages as a result of handling or oper-
ating the machine.

Notes:

Some illustrations in this manual might be slightly different from the machine.

Certain options might not be available in some countries. For details, please contact your local dealer.

Operator Safety

This machine contains LED Array in scanner and writing units.

The machine is considered a class 1 LED device, safe for both office and EDP use.

Notes:

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good copy quality, Rex-Rotary recommends that you use genuine Rex-Rotary toner.

Rex-Rotary shall not be responsible for any damage or expense that might result from the use of parts
other than genuine Rex-Rotary parts in your Rex-Rotary office product.

Power Source

220 - 240V, 50/60Hz, 10A or more

Please be sure to connect the power cord to a power source as above. For details about power source,
see p.62 “Power Connection”.

NeptuneC1_GBzen_F_FM_pre.book Page 1 Tuesday, December 16, 2003 5:03 PM

«
1
2
3
4
5
...
»

Содержание Aficio 240W





























































































Отзывы:

Нет отзывов