Ricoh Aficio 2016 Скачать руководство пользователя страница 60

Страница: 60 / 72

Remarks

Where to Put Your Machine

Machine Environment

Choose your machine's location care-
fully. Environmental conditions
greatly affect its performance.

Optimum environmental conditions

CAUTION:

• Temperature: 10-32

C (50-89.6

(humidity to be 54% at 32

C, 89.6

• Humidity: 15-80% (temperature to

be 27

C, 80.6

F at 80%)

• A strong and level base.
• The machine must be level within

5 mm, 0.2 inches: both front to rear,
and left to right.

• To avoid possible buildup of

ozone, be sure to locate this ma-
chine in a large well ventilated
room that has an air turnover of
more than 30 m

/hr/person.

Environments to avoid

• Locations exposed to direct sun-

light or other sources of strong
light (more than 1,500 lux).

• Locations directly exposed to cool

air from an air conditioner or heat-
ed air from a heater. (Sudden tem-
p e r a t u r e c h a n g e s c a n c a u s e
condensation to form inside the
machine.)

• Locations close to machines gener-

ating ammonia, such as a diazo
copy machine.

• Places where the machine will be

subject to frequent strong vibra-
tion.

• Dusty areas.
• Areas with corrosive gases.

•

Keep the machine away from hu-
midity and dust. Otherwise a fire
or an electric shock might occur.

•

Do not place the machine on an
unstable or tilted surface. If it top-
ples over, an injury might occur.

•

If you use the machine in a con-
fined space, make sure there is a
continuous air turnover.

KirC2_AEcopyF1_FM.book Page 52 Wednesday, April 27, 2005 7:26 PM

Содержание Aficio 2016









































































Результаты поиска

Содержание Aficio 2016

Отзывы:

Бренды по названию

Популярные бренды

Ricoh Aficio 2016, Руководство по эксплуатации

Результаты поиска

Содержание Aficio 2016

Отзывы:

Бренды по названию

Популярные бренды